Recommendations for the replacement of high-flow water filter elements

High-flow water filter elements are used daily for work. Their role and applicable field are greatly affected by their characteristics. Then, after long-term use, how do you replace large-flow water filters?


These are six characteristics and benefits of high-flow water filter cartridges.


1. The range of filtration accuracy is relatively wide, and you can choose between 0.1-100um.


2. The material of the pleated filter element is made of relatively high polypropylene, without any adhesive added, which greatly reduces the probability of the leaching of the filter column itself.


3. The chemical compatibility of the high-flow water filter element is very good, and it is resistant to strong acid. Strong base, can be used to filter some organic solvents and strong acid and alkali chemicals.


4. The large-flow water filter element has a very good dirt holding capacity, and at the same time the retention efficiency of particulate matter is very high.


5. The high-flow water filter element can withstand higher temperatures and has very good high-temperature resistance. At the same time, it can perform continuous operation in a high-temperature environment and can withstand repeated high-temperature and high-pressure disinfection and sterilization.


6. The mechanical strength of the high-flow water filter element is very high, which prolongs its service life.


How to replace the high-flow water filter element:


Water will usually overflow during this process. Please prepare cleaning utensils such as a basin or towel:


1. Turn off the electroplating ball valve and pressure barrel ball valve;


2. Turn on the gooseneck faucet to drain the residual water in the pipeline;


3. After the water no longer flows out, use the filter housing wrench to open the filter housing with the filter element;


4. Take out the old filter element and install the new filter element with the same standard;


5. Coat the black "O" ring above the filter housing with a lubricant such as petroleum jelly, and then put the "O" ring into the groove in the filter housing;


6. Tighten the filter housing in a vertical way, and try to avoid displacing the "O" ring;


7. Open the electroplating ball valve and the pressure barrel ball valve.


Guangzhou Lvyuan Water Purification Equipment Co., Ltd. specializes in the production of various filter elements, welcome to consult!

Comments

Popular posts from this blog

rufio costume

10 Tips to Ordering Kitchen Cabinets Online

Guangdong NEW ENERGY Technology Development